Hobby Master Archive

Authentic Detailing Pre-Painted by professionals Accurate paint colors Markings Tampo (pad) applied Fully Assembled Die-Cast Model True to Scale (1:72) Weathering and insignias Turret turns Metal turret and main gun Realistic tracks Hobby Master 1/72 Ground Power Series HG3413 US M10 Tank Destroyer “Duckbill” “Corsair II” France, 1944

The US M10 was the most produced US tank destroyer of WWII. The British M10s were called Achilles IIC because of the modification of the main gun from a 3 inch gun to a quick-firing British 17 Pounder. The conversions took place at the Royal Arsenal at Woolwich. The Mk. IC had a diesel engine while the Mk. IIC had a gasoline engine. Even the gun of the Mk. IIC was having difficulty against the heavy armor of the German Panthers and Tigers. Gradually the M36 Jackson with its heavier armor began to take over from the M10 and Achilles.

Specifications M10 Tank Destroyer Crew: 5 (commander, gunner, loader, driver, co-driver)

Weight Combat weight: 32.6 tons (29,574.22 kg) Power-to-weight ratio: 12.6 hpfT Dimensions Overall length: 22.3 ft. (6.83 m) Width: 10ft. (3.05 m) Height: 9.5 ft. (2.90 m) Ground clearance: 17 inches (43.18 cm)

Power Engine: Two General Motors 6046 12 cylinder, 2 cycle diesel with 850 cubic inch displacement; 410hp Transmission: Syncromesh transmission with 5 forward, one reverse gear Fuel capacity: 165 gallons (624.59 l)

Performance Max. speed (road): 30mph (48.2 km/h) Max. speed ‘(cross-country): 20mph (32.18 km/h) Max. range: 200 miles (322 km) Fuel consumption: 1.2 miles per gallon (0.5 km/l)

Armament 1 X 3-inch main gun M7 in Mount M5, 54 rounds 3-inch; M62 APC projectile: muzzle velocity 2,600 ft/sec - penetration of 93mm at 500 yards at 30 degrees M93 HVAP projectile: muzzle velocity 3,400 ft/sec - penetration of 93mm at 500 yards at 30 degrees Maximum effective range: 16,100 yards (14,721 m) Gun depression/elevation: -10 to +30 degrees 1 X .50 cal. M2 HB machine gun 1,000 rounds Armor 2.24 in (57mm) gun mantlet 0.98 in (25mm) turret sides 1.5 in (38mm) upper hull front 1.97 in (50mm) lower hull front 0.75 in (19mm) upper hull side 0.98 in (25mm) lower hull side